H-Berserk 7777

Hoodie Measurement Guide

To ensure the best fit, please refer to the measurement points below. All measurements are taken with the garment laid flat.

• Chest Width
  Measure straight across the chest from one armpit to the other (pit to pit), at the widest part.

• Front Length
  Measure from the highest point of the shoulder down to the bottom hem of the hoodie.

• Full Sleeve Length
  Measure from the neck point (where the neck meets the shoulder) to the end of the sleeve, including the cuff.

• Shoulder Length
  Measure from the neck point to the end of the shoulder seam.

• Sleeve Length
  Measure from the end of the shoulder seam to the end of the sleeve.

• Hood Length
  Measure from the base of the neckline (center back) over the top of the hood to the front edge.

Care Guide: 

Proper care will help preserve the quality of both the garment and the print.

Washing Instructions

• Turn the hoodie inside out before washing.

• Use cold water and select a gentle cycle.

• Wash with similar colors to prevent dye transfer.

• Use mild detergent only. Avoid bleach and fabric softeners.

Drying Instructions

• Air dry flat or hang dry in the shade.

• Do not tumble dry. High heat can damage the print.

Ironing Instructions

• If ironing is necessary, turn the garment inside out.

• Use a low heat setting and place a cloth over the printed area.

• Do not iron directly on the DTF print.

Additional Notes

• Do not dry clean.

• Store in a cool, dry place away from direct sunlight.